Brocade Fabric Manager Administrator's Guide (53-10000196-01-HP, November 2006)

Fabric Manager Administrator’s Guide 21-3
Publication Number: 53-1000196-01-HP
Accessing Third-Party Management Applications
21
c. Optional: Type the arguments to the application, separating each argument with a space, or
click Edit to select the arguments.
Figure 21-4 Selecting Application Arguments
Arguments vary, depending on whether you select a fabric or switch.
5. If your application is located on the Internet, select the URL checkbox and then type the URL to
the application.
6. Click OK.
7. Click Apply to close the Configure Application window.
The applications are added to the Launch submenu.
Configuring Multiple Fabrics
Use the following procedure to add a third-party management application to several fabrics or switches
at one time.
To add a third-party management application to multiple fabrics or nodes
1. In the Information Panel, select the fabrics or switches with which you want the application
associated.
2. With the fabrics or switches still selected, right-click and choose Management Applications >
Configure from the context menu that appears.
3. Follow the steps in “Adding Third-Party Management Applications” on page 21-2 to add the
application and its arguments.
4. Click Apply to All Fabrics (or Apply to All Switches).
Previously configured applications for the selected fabrics and switches are deleted and replaced
with the new application.