Brocade Fabric Manager Administrator's Guide (53-10000196-01-HP, November 2006)

21-6 Fabric Manager Administrator’s Guide
Publication Number: 53-1000196-01-HP
Accessing Third-Party Management Applications
21
To launch Web Tools Switch Explorer
1. In the Information Panel, right-click the switch from which you want to run Switch Explorer and
choose Management Application > Configure.
The Configure Applications for Switch window appears (Figure 21-2 on page 21-2).
2. Click Add.
The Add Application window appears (Figure 21-3 on page 21-2).
3. In the Application Name edit box, type WebTools SwitchExplorer.
4. Click the URL radio button.
5. In the URL edit box, type http://%IP%
6. Click OK.
Switch Explorer requires the IP address of the switch to display. Your window should look similar
to Figure 21-7.
Figure 21-7 Configuring Switch Explorer
7. Click Apply.
8. In the Information Panel, right-click the switch you just configured and choose Management
Application > Launch > WebTools SwitchExplorer.
The Web Tools Switch Explorer window for that switch appears, as illustrated in Figure 21-8 on
page 21-7.