Brocade Fabric Manager Administrator's Guide (53-10000196-01-HP, November 2006)
Fabric Manager Administrator’s Guide 22-1
Publication Number: 53-1000196-01-HP
Chapter
22
Creating Reports
Displaying the Switch Health Report
Fabric Manager creates a switch health report that is Web-based. The report displays the switch state
contributors, the status, and the IP address of the switch. Note that this is a static report and not a
dynamic view of the switch. See the Web Tools Administrator’s Guide for additional information.
The switch health report is available only for switches running the following firmware versions:
• Fabric OS v3.2.x or higher
• Fabric OS v4.4.x or higher
• Fabric OS v5.0.0 or higher
For other switches, either the switch reports option is disabled or an error message is displayed.
To display the switch health report
1. Select a switch and click Reports > Switch Health Reports from the Menu bar.
You can also right-click a switch and select Health Report from the context menu.
The Switch Health Report displays, as shown in Figure 22-1.