Brocade Fabric Manager Administrator's Guide (53-10000196-01-HP, November 2006)

Fabric Manager Administrator’s Guide 24-7
Publication Number: 53-1000196-01-HP
Creating a Login Banner
24
To capture supportShow information
1. Launch the Server Management Console.
2. Click the SupportShow tab.
3. Click Browse to select the path where the supportShow data will be saved.
4. Click Capture Technical Support Information.
The Server Management Console displays the following confirmation message when the capture is
complete:
Creating a Login Banner
You can configure a login banner that displays after you successfully log in to Fabric Manager (see
Figure 24-6). By default, no banner is set up.
If you configure a login banner, then after a user successfully logs in to Fabric Manager, the Fabric
Manager client displays the login banner dialog with two buttons. If the user clicks Agree and
continue, the client proceeds as usual; if the user clicks Disagree and exit, the client closes.
Figure 24-6 Login Banner
The BannerMessage tab of the Server Management Console allows you to create and edit this banner.
If the Database Server is not running, you cannot edit the banner.