Brocade Fabric Manager Administrator's Guide (53-10000196-01-HP, November 2006)

24-10 Fabric Manager Administrator’s Guide

Publication Number: 53-1000196-01-HP

Changing the Web Server Port Number

5. Optional: If you selected Connect using HTTPS, check or uncheck the following options. By

default, both options are checked.

• Enable hostname verification

If enabled, hostname verification fails if the name on the security certificate on the switch is

invalid or does not match the name or IP address of the switch.

• Enable certificate validation

If enabled, certificate validation fails if the security certificate was issued by a company you

have chosen not to trust or if the certificate date is invalid. To enable trust, you must install the

certificate in the Fabric Manager trusted root CAs store.

6. Click Apply to save the changes.

You must restart the server for the changes to take effect.

Changing the Web Server Port Number

Using the Settings tab of the Server Management Console, you can change the Web Server port

number. The configuration setting applies to the entire Fabric Manager server and not to selected

switches. The default Web Server port number is 80.

Figure 24-9 Server Management Console, Security Tab

To change the Web Server port number

1. Launch the Server Management Console.

2. Click the Settings tab.