Brocade Fabric Manager Administrator's Guide (53-10000196-01-HP, November 2006)

2-12 Fabric Manager Administrator’s Guide
Publication Number: 53-1000196-01-HP
Installing the Fabric Manager Server
2
c. Optional: You can add multiple RADIUS servers by entering their configuration
information and clicking Add. To edit information you have already entered, select a
server from the table at the bottom of the window, make your changes, and click Update.
Figure 2-8 Switch-Based Authentication
For switch-based authentication:
Enter the IP addresses of the switches, separating each IP address with a semicolon.
When using switch-based authentication, you should enter multiple switch IP addresses. If you
enter only a single switch IP address, you cannot access Fabric Manager if that switch is down.
16. Click Next.
The SAN size selection window appears.