Brocade Web Tools Administrator's Guide (53-0000194-01, November 2006)

7-12 Web Tools Administrator’s Guide
Publication Number: 53-0000194-01
7
Managing IP Interfaces for a GbE Port
You can configure a new IP interface, edit an existing IP interface, or delete an IP interface by clicking
the Add, Edit, and Delete tasks respectively on the IP Interfaces tab for a GbE port.
Before you can delete an IP interface, you must first delete the corresponding FCIP tunnel.
To add a new IP interface
1. Click a port in the Switch View to launch the Port Management module in a separate window (see
Figure 5-1 on page 5-2).
2. Click the GigE Ports subtab.
3. Click the port you want to edit.
4. Click the IP Interfaces subtab.
Figure 7-4 IP Interfaces Tab for GbE Ports
5. Click Add in the task bar.
6. Type the IP address, subnet mask, and MTU size for the new IP interface.
7. Click Add.