Brocade Web Tools Administrator's Guide (53-0000194-01, November 2006)

Web Tools Administrator’s Guide 7-13

Publication Number: 53-0000194-01

To edit an IP interface

1. Click a port in the Switch View to launch the Port Management module in a separate window (see

Figure 5-1 on page 5-2).

2. Click the GigE Ports subtab.

3. Click the port you want to edit and click the IP Interfaces subtab.

4. Select the IP interface to edit in the table on the right side of the window.

5. Click Edit in the task bar.

The Edit IP Interface dialog box displays, populated with the current configuration values.

6. Retype the subnet mask and MTU size for the IP interface and click OK.

To delete an IP interface

1. Click a port in the Switch View to launch the Port Management module in a separate window (see

Figure 5-1 on page 5-2).

2. Click the GigE Ports subtab.

3. Click the IP Interfaces subtab.

4. Select the IP interface to delete in the table on the right side of the window. Use Shift-click and

Ctrl-click to select multiple IP interfaces.

5. Click Delete in the task bar.

6. Click Yes in the confirmation window.

aution

You cannot delete an active FCIP tunnel.