Brocade Web Tools Administrator's Guide (53-0000194-01, November 2006)

Web Tools Administrator’s Guide 9-13
Publication Number: 53-0000194-01
9
Renaming Zones
Use the following procedure to change the name of a zone.
To rename a zone
1. Launch the Zone Admin module as described on page 9-3.
2. Click the Zone tab.
3. Select the zone you want to rename from the Name drop-down menu.
4. Click Rename.
The Rename a Zone dialog box displays.
5. Type a new zone name and click OK.
The zone is renamed in the Zone Admin buffer. At this point you can either save your changes or
save and enable your changes.
6. Click Zoning Actions > Save Config Only to save the configuration changes.
To enable the configuration, see “Enabling Zone Configurations” on page 9-23.
Copying Zones
Use the following procedure to copy a zone configuration.
To copy a zone
1. Launch the Zone Admin module as described on page 9-3.
2. Click the Zone tab.
3. Select the zone you want to delete from the Name drop-down menu.
4. Click Copy.
The Copy An Existing Zone dialog box displays.
5. Enter a name for the copied zone.
6. Click OK.
The selected zone is copied from the Zone Admin buffer.
7. Click Zoning Actions > Save Config Only to save the configuration changes.
Since no changes were made to the effective configuration, you do not need to enable the configuration.