Brocade Web Tools Administrator's Guide (53-0000194-01, November 2006)

Web Tools Administrator’s Guide 9-21
Publication Number: 53-0000194-01
9
Creating Zone Configurations
Use the following procedure to create a zone configuration. After creating a zone configuration, you
must explicitly enable it for it to take effect.
To create a zone configuration
1. Launch the Zone Admin module as described on page 9-3.
2. Select a format to display zoning members in the Member Selection List as described in “Zoning
Views” on page 9-8.
3. Click the Zone Config tab and click New Zone Config.
The Create New Config dialog box displays.
4. Type a name for the new configuration and click OK.
The new configuration displays in the Name list.
5. Click plus signed (+) in the Member Selection List to view the nested elements.
The choices available in the list depend on the selection made in the View menu.
6. Select an element in the Member Selection List that you want to include in your configuration.
The Add Member button becomes active.
7. Click Add Member to add configuration members.
Selected members are moved to the Config Members Window.
8. Repeat steps 6 and 7 to add more elements to your configuration.
9. Click Zoning Actions > Save Config Only to save the configuration changes.
To enable the configuration, see “Enabling Zone Configurations” on page 9-23.
N
ote
Any changes made to the currently enabled configuration will not appear until you reenable the
configuration.