Brocade Web Tools Administrator's Guide (53-0000194-01, November 2006)

Web Tools Administrator’s Guide 9-25
Publication Number: 53-0000194-01
9
Displaying Enabled Zone Configurations
The enabled zone configuration screen displays the actual content of the single zone configuration that
is currently enabled on the fabric, whether it matches the configuration that was enabled when the
current zone admin session was launched or last refreshed (see Figure 9-4 on page 9-25). The zones,
QuickLoops, and FA zones are displayed, and their contents (ports, WWNs, AL_PAs) are displayed
next to them. Aliases are not displayed in the enabled zone configuration. If there is no active zone
configuration enabled on the switch, a message is displayed to that effect.
The enabled configuration is listed in the upper-right corner of the Zone Admin module.
Figure 9-4 Effective Configuration Window
To view the enabled zone configuration name without launching the Zone
Admin module
1. Select a switch from the Fabric Tree.
The selected switch appears in the Switch View.
The current zone configuration name (if one is enabled) is displayed in the lower portion of the
Switch Information View. If no zone configuration is enabled, the field displays “No configuration
in effect”.