Brocade Web Tools Administrator's Guide (53-0000194-01, November 2006)

Web Tools Administrator’s Guide 11-5

Publication Number: 53-0000194-01

To access the FC Routing module

1. Select a switch from the Fabric Tree.

The selected switch appears in the Switch View.

2. Click the FCR button on the Switch View.

The FC Routing module displays (as shown in Figure 11-2). If FC-FC Routing is disabled, a

message to that effect displays on all the tabs in the module.

Figure 11-2 FC Routing Module in Disabled Mode with General Tab Selected

Viewing and Managing LSAN Fabrics

The LSAN Fabric tab (see Figure 11-3 on page 11-6) displays all the LSAN fabrics visible to your

switch, in both a tabular and tree form. (If FC-FC Routing is disabled, the tables and tree nodes in this

tab are empty.)

For more detailed information about a specific LSAN fabric, click a fabric name in the table and then

click View Details in the task bar. You can also click the fabric name in the tree on the left side of the

window.

To manage an LSAN fabric, select the fabric to manage (either by clicking a row in the table or by

clicking the fabric name in the tree) and click Manage LSAN Fabric in the task bar. A browser window

is launched with the following url:

http://ip-address-of-lsan-fabric-switch

This message displays on all tabs in FCR module