Brocade Web Tools Administrator's Guide (53-0000194-01, November 2006)

11-6 Web Tools Administrator’s Guide
Publication Number: 53-0000194-01
11
For Brocade switches, this launches Web Tools. For non-Brocade fabrics, this launches the element
manager for that switch.
Figure 11-3 FC Routing Module with LSAN Fabrics Tab Selected
Viewing and Configuring EX_Ports
The EX_Ports tab (see Figure 11-4 on page 11-7) displays all of the EX_Ports on the switch, including
configuration and status information. The ports are sorted by slot number, and then by row number
within each slot.
For more detailed information about a specific port, click a port name in the table and then click View
Details in the task bar. You can also click the port name in the tree on the left side of the window.
From the EX_Ports tab, you can perform the following port management tasks by selecting a port in the
table and then clicking a task in the task bar:
• “To configure an EX_Port” on page 11-7
• “To edit the configuration of an EX_Port” on page 11-8
• Rename an EX_Port.
• Swap the Port Index of an EX_Port (described in “Swapping Port Index” on page 5-13).
• Enable or disable an EX_Port.
N
ote
If FC Routing is disabled, then you have to disable all of the EX_Ports and you cannot enable them until
FC Routing is enabled.