Brocade Web Tools Administrator's Guide (53-0000194-01, November 2006)

Web Tools Administrator’s Guide 15-13
Publication Number: 53-0000194-01
15
To use Easy Create
1. Launch the iSCSI Target Gateway Admin module as described on page 15-6.
2. Select the Targets tab
3. Click Easy Create.
Figure 15-10 Easy Create Wizard
4. Follow the instructions in the wizard to create a virtual target in iSCSI.
The wizard is self-explanatory, so the individual steps are not described in this document.
To edit an iSCSI Target
1. Launch the iSCSI Target Gateway Admin module as described on page 15-6.
2. Select the Targets tab.
3. Select the IQN in the left pane of where you want to edit the targets.
N
ote
When you click Add in the Easy VT Creation dialog, virtual targets virtual targets are
created for all the available physical targets in a 1:1 combination. If you add the virtual
target using the Add button and click OK, the virtual target will be created for only the
physical targets that were selected.