Brocade Web Tools Administrator's Guide (53-0000194-01, November 2006)

Web Tools Administrator’s Guide 17-13
Publication Number: 53-0000194-01
17
Setting SNMP Trap Levels
When you set trap levels for a SilkWorm 24000 or 48000 configured with two logical switches, it is on
a logical-switch basis. This means that for each logical switch, you must set trap levels individually.
To set trap levels
1. Launch the Switch Admin module as described on page 3-3.
2. Click the SNMP tab.
Figure 17-5 SNMP Tab
3. Select a trap level for a recipient from the corresponding Trap Level drop-down menu in the
SNMPv1 and SNMPv3 sections.
The level you select identifies the minimum event level that will prompt a trap.
4. Click Apply.