HP StorageWorks B-series Data Center Fabric Manager Enterprise 10.1.4 Release Notes (5697-0085, July 2009 - includes all 10.1.x versions)

DCFM 10.1.0 fixes
Table 3 lists defects closed in the DCFM 10.1.0 release.
Table 3 DCFM 10.1.0 closed defects
SolutionClosed defect summary
Fixed in DCFM 10.1.0
Workaround—Navigate to the correct help section by
launching the main help dialog.
Help dialog is not launched for Technical Support Data
Collection dialog.
Fixed in DCFM 10.1.0
Workaround—The values can be obtained from
CLI/WT.
Location, Description, and Contact column details are
not populated in the Product List.
Symptom—The user does not see any values for
Location, Contact, and Description columns in Product
list.
Fixed in DCFM 10.1.0
Workaround—Configure clockserver parameter
from CLI using command configdownload.
Configuring NTP clockserver parameters fails from
DCFM.
Symptom—User will not be able to configure
clockserver parameter from DCFM. Also a success
message is displayed for the failed operation.
Fixed in DCFM 10.1.0Call home are not getting generated when a DCFM
server is configured with IPv6 address.
Symptom—User will not receive Call Home if DCFM
server configured with IPv6 address.
Fixed in DCFM 10.1.0
Workaround—View correct N_Port mappings through
the ag –mapshow CLI command executed on the
AG.
Altering the N_Port to F_Port mappings of an Access
Gateway is not updated on the host group of product
list device tree.
Symptom—User views incorrect N_Port mappings in
the host group of the product list device tree, when
the N_Port mapset of an Access Gateway is changed.
Fixed in DCFM 10.1.0Unable to see all toolbar buttons at once in View
nl
Reports dialog when there are no reports.
Symptom—Customer is unable to see all the toolbar
buttons at once in the View Reports dialog when there
are no reports.
Fixed in DCFM 10.1.0Sometimes unable to create Storage arrays or HBA
servers.
Symptom—When the customer does a storage port
mapping, the Storage arrays or HBA servers created
in the topology or in the mapping dialogs are not
displayed. Only the master log entry reads New
server/Storage array added.
Fixed in DCFM 10.1.0.
Documentation update— The script/binary must be
valid for the server OS. It must run as a background
process to complete successfully without opening a
GUI or requiring any input.
Launch script/binaries that appear to not be executed.
Symptom—It would appear that scripts/binaries are
not being executed.
12