HP StorageWorks B-series Data Center Fabric Manager Enterprise 10.1.4 Release Notes (5697-0085, July 2009 - includes all 10.1.x versions)

ManualsBrandsHP ManualsStorageHP StorageWorks SAN Switch 2/16V

SolutionClosed defect summary

Fixed in DCFM 10.1.3The Port Optics dialog does not display information for nondefault logical

switches.

Fixed in DCFM 10.1.3

DCFM now prevents the user from

adding port numbers higher than

31 to a logical switch configured

for the 256 area limit with port-

based area assignment.

DCFM incorrectly allows assigning port numbers higher than 32 on a 48-

port blade to a logical switch if the 256 area limit is set with a port-based

area assignment. It also allows setting the 256 area limit if the logical

switch already has ports higher than 31.

Fixed in DCFM 10.1.3Changes made in the client export port are not effective after a client restart

in DCFM 10.1.2. or earlier.

Fixed in DCFM 10.1.3

Workaround—You can use the

CLI to perform Zeroize EE on the

Brocade DCX-4S.

Zeroize Encryption Engine (EE) is not supported on an HP StorageWorks

DC04 SAN Director.

Fixed in DCFM 10.1.3

Workaround—Exit the client and

then re-launch it.

After a storage array is created, the connection between the storage array

and the switch is not displayed in the topology view.

Fixed in DCFM 10.1.3DCFM is unable to recognize a smartcard reader on a local client on

Linux or Solaris hosts because the Libpcsclite.so file is not included

in the DCFM installation.

Fixed in DCFM 10.1.3If an incorrect KeyID is entered for key vault masterkey restore using

keyvault, the error message references an incorrect keyvault rather than

the SKM keyvault.

Fixed in DCFM 10.1.3Web Linker crashes when Top Talkers is enabled for the Brocade 200E

in DCFM.

Symptom—Some of the switch processes are terminated and switch per-

formance is reduced.

DCFM 10.1.4 fixes

Table 6 lists defects closed in the DCFM 10.1.4 release.

Table 6 DCFM 10.1.4 closed defects

SolutionClosed defect summary

Fixed in DCFM 10.1.4When historical performance data collection is enabled, DCFM can

experience slower response times. This is due to an increase in the number

of performance records in the database, and can eventually cause the

disk to run out of space.

Fixed in DCFM 10.1.4All zoning transactions using DCFM are aborted on a virtual fabric.

However, the same zoning transactions are processed successfully using

the CLI.

Fixed in DCFM 10.1.4FTP-related operations from the internal FTP server fail.

Fixed in DCFM 10.1.4In an FCR/FCIP configuration, the LSAN soning dialog box does not dis-

play edge fabrics if the FID is set to 1.