HP StorageWorks B-series Data Center Fabric Manager Enterprise 10.1.4 Release Notes (5697-0085, July 2009 - includes all 10.1.x versions)

SolutionClosed defect summary

Fixed in DCFM 10.1.4

Workaround prior to this upgrade:

Manually load the firmware file

after migration.

Files loaded in the firmware library of M-EOS Element Manager appear

to be lost after migration from EFCM V9.7.x, but the files were actually

imported to the install directory/data/eos/em/_Raw/firmware

file folder.

Fixed in DCFM 10.1.4Very rarely, with a cascaded FICON configuration, the FICON

Troubleshooting Wizard window does not show all switches or provide

information in the error message box.

Fixed in DCFM 10.1.4After fabrics are discovered, ISLs disappear when a monitor or unmonitor

operation is performed.

Fixed in DCFM 10.1.4In an M-EOS environment, if you select a different paddle (group of ports)

in Line Module view, the Hardware/FRU view does not update to show

the change, and you cannot see the ports on the selected Line module.

Fixed in DCFM 10.1.4After stopping services in the Server Management Console (SMC), the

status bar does not indicate the same service status as the Services tab.

Fixed in DCFM 10.1.4ISL disappears in the Topology when the Seed Switch is changed from

the switch running FOS 6.1 or earlier to a Non Default Logical Switch.

Fixed in DCFM 10.1.4On the HP StorageWorks 8/80 SAN Switch, four logical switches are

allowed. If you have configured four logical switches, and you use the

Logical Switches window to delete a switch and then create a new one,

when you click OK to process the edits, the old logical switch is deleted,

but the new one is not created. An error message appears, indicating

that the maximum number of logical switches are present on the switch.

Fixed in DCFM 10.1.4Internal errors and slow response times occur on the host server during

DCFM installation. Database timeouts are written to the log.

Fixed in DCFM 10.1.4Real-time performance graphs are not displayed for some end-to-end

monitors and the following error message is written to the log Switch

null in fabric has been removed from discovery. Real

time performance data not available.

Fixed in DCFM 10.1.4Selecting Disable VF from the chassis group without discovering the default

switch does not disable the VF; an error message appears.

Fixed in DCFM 10.1.4

Workaround prior to this upgrade:

The functionality is available in the

Create View dialog.

The Create Meta-SAN View menu option is not available when

right-clicking a backbone fabric.