HP StorageWorks SAN Switch 2/32 V4.2.X Installation Guide (AA-RTQVD-TE, May 2004)

Installing the SAN Switch 2/32
33SAN Switch 2/32 Version 4.2.x Installation Guide
— For an HP System/e cabinet, install two #10-32 x 1/2-inch Phillips
pan-head screws with captive star lock washers and two #10 alignment
washers in the upper and lower hole locations of the right rail. Then install
two #10-32 x 1/2-inch Phillips pan-head screws with captive star lock
washers and two #10 alignment washers in the upper and lower hole
locations of the left rail. See
Figure 8.
Figure 8: Assembling the outer rails (HP System/e cabinet)
Caution: Do not use any screws other than the fourteen that are provided. Use
of any longer screws can cause damage to internal components.