HP StorageWorks SAN Switch 2/32 V4.2.X Installation Guide (AA-RTQVD-TE, May 2004)

Installing the SAN Switch 2/32
37SAN Switch 2/32 Version 4.2.x Installation Guide
Figure 12: Installing the switch into a rack (HP System/e cabinet)
7. Tighten the nuts installed in substep a of step 4 on page 30. See Figure 6 on
page 31.
Note: To uninstall a switch, remove the middle #10-32 x 1/2-inch Phillips pan head
screw with captive star lock washer from either side of the rack uprights.