HP StorageWorks SAN Switch 2/32 V4.2.X Installation Guide (AA-RTQVD-TE, May 2004)

Managing the SAN Switch 2/32

65SAN Switch 2/32 Version 4.2.x Installation Guide

Figure 19: Power supplies and fan assemblies locations

The Fabric OS identifies the power supplies as follows, viewing the switch from

the non-port side:

■ Power supply #1 is on the right.

■ Power supply #2 is on the left.

To determine whether a power supply requires replacing:

■ Check the Power Supply LED next to the AC switch.

■ Issue the psshow command.

■ In Web Tools, click the Power Status icon.

Fan Assemblies

The three fan assemblies are hot-swappable if replaced one at a time. The fan

assemblies are identical and fit into any fan assembly slot; see Figure 20.

1 Power supply #2

2 Fan assembly containing

fans 5,6

3 Fan assembly containing fans 3,4

4 Fan assembly containing fans 1,2

5 Power supply #1

SHR-2580A

1 3 4 5