San Switch 2/32 v4.1.x - Installation Guide

17SAN Switch 2/32 Version 4.1.x Installation Guide
1
Overview
The HP StorageWorks SAN Switch 2/32 is a high-performance, 32-port,
2 gigabit (Gb) Fibre Channel switch used to interconnect storage devices, hosts,
and servers in a Storage Area Network (SAN). It integrates Fabric Operating
System (FOS) firmware Version 4.1.x or higher, and is compatible with the HP
StorageWorks switch product family. The SAN Switch 2/32 operates in a fabric
containing multiple switches, or as the only switch in the fabric.
This chapter provides the following information:
■ SAN Switch 2/32 Features, page 18
■ Optional Hardware Kits, page 21
The HP StorageWorks SAN Switch 2/32 is offered in two configurations; the 2/32
and 2/32 power pak. Refer to the HP StorageWorks SAN Switch 2/32 Version 3.1.x
Release Notes for a complete list of management features enabled on your specific
switch.
Note: This guide refers to both models as the SAN Switch 2/32, unless otherwise
noted.