San Switch 2/32 v4.1.x - Installation Guide

Overview
19SAN Switch 2/32 Version 4.1.x Installation Guide
■ Slide Rack Mount Kit
■ The following LED indicators:
— Switch Power/Status LED on the port side of the switch
— Port Readiness LED on the non-port side of the switch
— Port Status LED and Port Speed LED for each port
— Power LED on each power supply
— Fan Failure LED on each fan assembly
Port Side of the SAN Switch 2/32
Figure 1 shows the port side of the SAN Switch 2/32.
Figure 1: Port side of the SAN Switch 2/32
Optical Ports
The Fibre Channel ports are numbered from left to right, with ports 0–15 in the
lower row and ports 16–31 in the upper row. The ports provide the following
functionality:
■ Automatic negotiation to highest common speed of all devices connected to
port
■ Port interfaces compatible with Small Form Factor Pluggable (SFP)
transceivers, both Short Wavelength (SWL) and Long Wavelength (LWL)
1 Serial port
2 Fibre Channel
port
3 IP address
label
4 Power switch
5 Ethernet port
SHR-2568A
1 3
5 4
2