San Switch 2/32 v4.1.x - Installation Guide

Installing the SAN Switch 2/32
46 SAN Switch 2/32 Version 4.1.x Installation Guide
Installing the Switch Using the HP StorageWorks SAN Switch
Universal Rack Mount Kit
This section provides instructions for installing the SAN Switch 2/32 in an
HP rack using the optional Universal Rack Mount Kit, part number 331148-B21.
The following items are required:
■ SAN Switch 2/32
■ Power cables
■ #2 Phillips screwdriver
■ 7/16 wrench or socket
■ The SAN Switch Universal Rack Mount Kit rails and rail mounting hardware
are listed below
(2) Rear mounting brackets
A right inner rail and a right outer rail
A left inner rail and a left outer rail
(14) #8-32 x 3/16 Phillips pan-head screw with captive star
lock washer
(10) #10-32 x 1/2 Phillips pan-head screw with captive star
lock washer