San Switch 2/32 v4.1.x - Installation Guide

Installing the SAN Switch 2/32
48 SAN Switch 2/32 Version 4.1.x Installation Guide
3. Attach the rear mounting brackets to the rear rack uprights by completing one
of the following steps:
— For an HP 9000 Series or comparable EIA rack, assemble each of the two
brackets with (2) #10-32 x 1/2 Phillips pan-head screws with captive star
lock washers and (2) #10 adapter washers as shown in Figure 12.
Figure 12: Installing the rear mounting brackets (HP 9000 Series or comparable EIA
rack)