San Switch 2/32 v4.1.x - Installation Guide

Installing the SAN Switch 2/32
51SAN Switch 2/32 Version 4.1.x Installation Guide
b. Depending on the rack you are using, complete one of the following
tasks:
— For an HP 9000 Series or comparable EIA rack, install two
#10-32 x 1/2 Phillips pan-head screws with captive star lock washers and
two #10 adapter washers in the upper and lower hole locations of the right
rail. Then install two #10-32 x 1/2 Phillips pan-head screws with captive
star lock washers and two #10 adapter washers in the upper and lower
hole locations of the left rail. See Figure 15.
Figure 15: Assembling the outer rails (HP 9000 Series or comparable EIA rack)