San Switch 2/32 v4.1.x - Installation Guide

Managing the SAN Switch 2/32
72 SAN Switch 2/32 Version 4.1.x Installation Guide
Interpreting LED Activity
SAN Switch 2/32 status is determined through the LED activity on the switch.
There are three possible LED states: no light, a steady light, and a flashing light.
The lights may be any of the following colors:
■ Green
■ Orange (may be referred to as “amber” in related documentation)
■ Yellow (appears when both green and orange LED elements are lit)
Note: Any errors related to LED activity are listed in the error log. For information
about the error log, refer to the
HP StorageWorks Fabric OS Procedures Version
3.1.x/4.1.x User Guide
.
LEDs on the Port Side of the Switch
The port side of the switch contains the following LEDs; see Figure 23:
■ One Switch Power/Status LED on right side
■ One Port Status LED next to each Fibre Channel port (lower LED)
■ One Port Speed LED next to each Fibre Channel port (upper LED)
Note: The port LEDs for the upper ports (ports 16–31) are to the left of the ports. The
Port LEDs for the lower ports (ports 0–15) are to the right of the ports.
.
Figure 23: LEDs on port side of SAN Switch 2/32
1 Port status LEDs (lower LED)
2 Port speed LEDs (upper LED)
3 Status LED
SHR-2578A
1
32