San Switch 2/32 v4.1.x - Installation Guide

Managing the SAN Switch 2/32
76 SAN Switch 2/32 Version 4.1.x Installation Guide
Table 5: Non-Port Side LED Patterns During Normal Operation
LED
Name
and
Location
LED
Location
Color
Display
Hardware
Status
Recommended
Action
Port
Readiness
LED
On far
right when
viewing
switch from
non-port
side
No light Switch is off, or
boot is not
complete, or
boot failed.
Verify switch is on
and has
completed
booting.
Steady green Switch is on and
all ports are
ready for use.
No action
required.
Steady
yellow
One or more
ports are offline.
Verify switch has
completed
booting and is not
disabled. If light is
still yellow, check
error log and Port
Status LEDs.
Name and
Location
(continued)
Location
(continued)
Slow-flashing
yellow
(on 1 second;
off 1 second)
One or both of
the following are
true:
One or more
environmental
ranges are
exceeded.
Error log
contains one or
more port
diagnostic error
messages.
1. Check
environmental
conditions,
error log, Port
Status LEDs,
transceivers,
cables, and
loopback
plugs.
2. Correct error
condition.
3. Clear error
log.
4. Rerun
diagnostics to
verify fix.
Power
SupplyLED
On each
power
supply (left
corner)
No light Power supply is
not providing
power.
Verify power
supply is on and
seated, and
power cord is
connected to a
functioning power
source.