San Switch 2/32 v4.1.x - Installation Guide

Managing the SAN Switch 2/32
79SAN Switch 2/32 Version 4.1.x Installation Guide
* Requirements for running IP over Fibre Channel:
— Must be run on both HBA and switch.
— Must be supported by both HBA and HBA driver.
Note: The HP StorageWorks SAN Switch 2/32 includes a different set of integrated
features, depending upon the model purchased. Refer to the
HP StorageWorks SAN
Switch 2/32 Version 4.1.x Release Notes
for a complete list of supported features.
Optional Management Feature – Fabric Manager
Fabric Manager provides a GUI that allows the administrator to monitor and
manage an entire fabric from a standard workstation. Use Fabric Manager to
manage fabrics containing integrated fabrics, in addition to individual switches.
Contact your HP authorized reseller for purchasing information.
Displaying the Optional Feature Licenses
Use these steps to display optional features installed on your switch.
1. Login to the switch as the admin user.
2. At the command line, enter the following command:
licenseShow
This command displays the license keys that have been entered for the switch
and the features enabled by those licenses.
Management server
Refer to the
HP StorageWorks Fabric OS
Procedures Version 3.1.x/4.1.x User Guide
and the HP StorageWorks Fabric OS Version
3.1.x/4.1.x Reference
G uide .
Ethernet or
Serial
connection
Native inband
interface
(over HBA
only)
Table 6: Management Options for the SAN Switch 2/32 (Continued)
Management Tool
Out-of-band
Support
In-band
Support