San Switch 2/32 v4.1.x - Installation Guide

Managing the SAN Switch 2/32

85SAN Switch 2/32 Version 4.1.x Installation Guide

Note: The transmit and receive speed of the links may be temporarily locked to a

specific speed during diagnostic testing.

Field Replaceable Units

You can replace the power supplies, fan assemblies, and motherboard in the field

without the use of special tools. The power supplies and fan assemblies are keyed

to ensure correct orientation during installation. Replacement instructions are

provided with all replacement units ordered.

Note: The SAN Switch 2/32 uses two AC power cords. To remove all power from the

switch, disconnect both power cords before servicing.

Power Supplies

The two power supplies are hot-swappable if replaced one at a time. They are

identical and fit into either power supply slot; see Figure 25.

Figure 25: Power supplies and fan assemblies locations

1 Power supply #2

2 Fan assembly containing

fans 5,6

3 Fan assembly containing fans 3,4

4 Fan assembly containing fans 1,2

5 Power supply #1

SHR-2580A

1 3 4 5