San Switch 2/32 v4.1.x - Installation Guide

Technical Specifications
97SAN Switch 2/32 Version 4.1.x Installation Guide
Power Supply Specifications
Table 8 lists power supply specifications. The power supply is universal and
capable of functioning worldwide without using voltage jumpers or switches. It
meets IEC 61000-4-5 surge voltage requirements. The power supply has its own
built-in fan for cooling, pushing the air towards the front of the switch.
.
Table 8: Power Supply Specifications
Specification Value
Outlet Correctly wired and earth-grounded
Maximum output 300 watts, with internal fans operating
Maximum system power
consumption
190–220 watts (with some variation
depending on transceiver vendor)
Input voltage 100–240 VAC (nominal 80% efficiency)
auto-ranging
Input line frequency 47–63 Hz
Harmonic distortion Active power factor correction per
EN61000-3-2
Btu rating at 80% efficiency 220 watts / 0.8 x 3.412 Btu/hr/watts =
938 Btu/hr
Inrush current Maximum of 15 amps for periods
longer than 300 microseconds, at 50
degrees Celsius, hot or cold start
Input line protection Fused in both hot and neutral lines,
using independent fuses