SAN switch 2/32 version 4.0.2b release notes

Firmware Upgrade Procedures
12 SAN switch 2/32 Version 4.0.2b Release Notes
Firmware Upgrade Procedures
UNIX environments
Use the following procedure to upgrade the SAN Switch 2/32 to firmware Version
4.0.2b in UNIX environments:
1. Download the firmware from the hp website into a Windows or UNIX
machine.
2. Unzip the firmware zip file. It will create several files and folders.
3. Verify that the FTP service is running on the UNIX or Windows machine.
4. Determine which CP card is the standby CP card by establishing a telnet
connection to a switch IP address and issuing the haShow command.
5. Login to the “standby” CP card as the “admin” user.
6. Issue the firmwareDownload command, as follows:
ter1_127:admin> firmwaredownload
Server Name or IP Address: xxx.xxx.xxx.xxx
User Name:
File Name: /pub/Beta1/release.plist Password:
Overwrite the whole firmware [Y]: y
Do Auto-Commit after Reboot [Y]: y
Reboot system after download [N]: y
Note: Rebooting the CP card causes the telnet session to disconnect from the standby
CP card. If Auto-Commit is selected as “n”, the old firmware version can be restored
using the firmwareRestore command. This may be applicable during testing of the
SAN.