SAN switch 2/32 version 4.0.2b release notes

Firmware Enhancements
16 SAN switch 2/32 Version 4.0.2b Release Notes
5. Click on the small icon of a folder with a key inside of it.
6. A new window appears and you are prompted for the user name and password
for the switch.
7. Enter the appropriate user name and password and the administrative menu
will appear.
8. Click on the Upload/Download tab to bring up Firmware menu.
9. Select the button Firmware Download in the Function category.
10. Under Host Details, make sure the Protocol setting is set to FTP.
11. In the User Name field, enter the user name for the OpenVMS machine you
are using.
12. In the Host IP field, enter the IP address of the OpenVMS machine you are
using.
13. In the Password field, enter the password for the username specified in step
11.
14. In the Filename field, enter the following: V4_0_2b/release.plist
15. Click on the button labeled Apply and the window will begin to display its
status.
Firmware Enhancements
The following sections list enhancements included with Fabric OS Version 4.0.2b
firmware.
Note: Fabric OS Version 4.0.2b firmware works with HP StorageWorks SAN Switch
2/32 and HP StorageWorks Core Switch 2/64 products. This firmware will not work if
loaded onto the HP StorageWorks SAN Switch 1 Gbps models, or HP StorageWorks
SAN Switch 2/8 or 2/16 products.