SAN switch 2/32 version 4.0.2b release notes

Fabric OS Commands
41SAN switch 2/32 Version 4.0.2b Release Notes
■ Debug 5
Example
The following example shows how to enable saving of Warning, Error, Critical
and Panic messages in the persistent error log.
switch:admin> errSaveLvlSet 3
The following example shows how to enable saving of Warning,
Error,
Critical and Panic messages in the persistent error log on the
Standby
CP for the switch instance 0.
switch:admin> errSaveLvlSet -s 0 3
See Also
errDump, errSaveLvlSet, errSaveLvlShow, errNvLogSizeSet
errSaveLvlShow Command
Short Description: Show current error save level setting of a switch. This
command is new for Fabric OS V4.0.2b or higher.
Syntax
errSaveLvlShow [-s swinst]
Availability
admin
Description
Use this command to find out the current value of the persistent error log save
level for a given switch instance. When this command is executed from the
Standby CP, the switch instance number operand is required. The switch instance
number is supplied by specifying the <-s swinst> operand. This operand is
not required when logged into the Active CP.
Operands
This command has the following operands:
s swinst - this is an optional parameter to specify a switch instance number.
This parameter is required on the Standby CP. This parameter should not be used
on the Active CP. You must follow -s with the switch instance number where the