SAN switch 2/32 version 4.0.2b release notes

Known Issues
61SAN switch 2/32 Version 4.0.2b Release Notes
configDownload Command
The configdownload command is designed to restore a backed-up
configuration for a switch. Use caution when downloading configuration files
from other switches. The following confirmation message now appears prior to
completing the configdownload command on the SAN Switch 2/32:
This command is used to download a backed-up configuration for a
specific switch. If using a file from a different switch, this
file's configuration settings will override any current switch
settings. Downloading a configuration file which was uploaded
from a different type of switch, may cause this switch to fail.
Do you want to continue [y/n]: y
The configupload and configdownload commands do not work on the
Microsoft FTP server if no password is specified.
The configupload and configdownload commands do not work if no
password is specified.
MIB and SNMP
To reduce security exposures, the following functionality has been removed from
the MIB:
■ Firmware download
■ Configuration file download
■ Configuration file upload
This was accomplished by removing support for the following MIBs:
■ swFwUpgrade
■ swCfUpload
■ swCfDownload
Note: Use the API or other management methods to access these functions.
Troubleshooting the I2C Time-out message
If an EM, I2C_TIMEOUT message displays, then either the I2C bus experienced a
fault (usually transient) or there is a hardware problem.