SAN switch universal rack mount kit installation addendum

Installing the Switch in a Rack Using the SAN Switch Universal Rack Mount Kit
9
Addendum Pg
HP StorageWorks SAN Switch 2/8|16|32 Installation Guide
a. Assemble the two inner rails (one on each side) to the switch using the
appropriate number (from step 5) of #8-32 x 3/16-inch Phillips pan-head
screws as shown in Figure 7.
Note: The rail kit provides fourteen #8-32 x 3/16-inch screws for assembling the
inner rails. Each switch requires a different number of these screws. For example,
Figure 7 shows the an inner rail being attached to the SAN Switch 2/16 with five
screws. Attaching both inner rails requires ten screws.
Figure 7: Assembling the inner rails