SAN switch universal rack mount kit installation addendum

Installing the Switch in a Rack Using the SAN Switch Universal Rack Mount Kit
12
Addendum Pg
HP StorageWorks SAN Switch 2/8|16|32 Installation Guide
Figure 10: Installing the switch into a rack (HP System/e rack)
8. Tighten the nuts installed in step a of step 4 on page 5. See Figure 4.
Note: To uninstall a switch, remove the middle #10-32 x 1/2-inch Phillips pan head
screw with captive star lock washer from either side of the rack uprights.
9. Continue the installation by returning to one of the following guides as
appropriate.
a. “Connecting AC Power” on page 45 in the HP StorageWorks SAN Switch
2/32 Installation Guide, Version 4.0.x.
b. “Connecting AC Power” on page 45 in the HP StorageWorks SAN Switch
2/16 Installation Guide, Version 3.0.x.
c. Connecting the power cord in step 8 on page 45 in the HP StorageWorks
SAN Switch 2/8 Installation Guide, Version 3.0.x.