SAN switch universal rack mount kit installation addendum

Installing the Switch in a Rack Using the SAN Switch Universal Rack Mount Kit
7
Addendum Pg
HP StorageWorks SAN Switch 2/8|16|32 Installation Guide
— For an HP System/e rack, install two #10-32 x 1/2-inch Phillips pan-head
screws with captive star lock washers and two #10 alignment washers in
the upper and lower hole locations of the right rail. Then install two
#10-32 x 1/2-inch Phillips pan-head screws with captive star lock washers
and two #10 alignment washers in the upper and lower hole locations of
the left rail. See Figure 6.
Figure 6: Assembling the outer rails (HP System/e rack)
5. Determine the number of #8-32 x 3/16-inch Phillips pan-head screws with
captive star lock washers required to assemble the inner rails by referring to
Table 1.
Table 1: Number of screws required to assemble the inner rails
Switch
Number of #8-32 x 3/16-inch
Screws
SAN Switch 2/32 12
SAN Switch 2/16 10
SAN Switch 2/8 14