Brocade Fabric OS Message Reference - Supporting Fabric OS v5.3.0 (53-1000437-01, June 2007)

96 Fabric OS Message Reference
53-1000437-01
FABR-1016
13
FABR-1016
Message <timestamp>, [FABR-1016], <sequence-number>,, WARNING, <system-name>, ficonMode
is enabled.
Probable Cause Indicates that FICON mode is enabled on the switch through a user interface command.
Recommended
Action
No action is required.
Severity WARNING
FABR-1017
Message <timestamp>, [FABR-1017], <sequence-number>,, WARNING, <system-name>, ficonMode
is disabled.
Probable Cause Indicates that FICON mode is disabled on the switch through a user interface command.
Recommended
Action
No action is required.
Severity WARNING
FABR-1018
Message <timestamp>, [FABR-1018], <sequence-number>,, WARNING, <system-name>, PSS
principal failed (<reason for not becoming the principal switch>: <WWN of new
principal switch>).
Probable Cause Indicates that a failure occurred when trying to set the principal switch using the fabricPrincipal
command. The message notifies the user that the switch failed to become the principal switch
because either:
• The switch joined an existing fabric and bypassed the F0 state.
• The fabric already contains a principal switch that has a lower world-wide name (WWN).
Recommended
Action
Make sure that no other switches is configured as the principal switch. Force a fabric rebuild by
using the switchDisable and switchEnable commands.
Refer to the Fabric OS Command Reference for more information the fabricPrincipal command.
Severity WARNING