Brocade Fabric OS Message Reference - Supporting Fabric OS v5.3.0 (53-1000437-01, June 2007)

Fabric OS Message Reference 103
53-1000437-01
FABS-1007
14
FABS-1007
Message <timestamp>, [FABS-1007], <sequence-number>,, WARNING, <system-name>, <Function
name>: Media state is invalid - status=<Status value>
Probable Cause Indicates that the Fabric OS has detected an invalid value in an object's status field. This is usually
an internal Fabric OS problem or file corruption.
Recommended
Action
Reboot or power cycle the switch.
If the message persists, run the firmwareDownload command to update the firmware.
Severity WARNING
FABS-1008
Message <timestamp>, [FABS-1008], <sequence-number>,, WARNING, <system-name>, <Function
name>
: Media oid mapping failed
Probable Cause Indicates that the Fabric OS was unable to locate a necessary object handle. This is usually an
internal Fabric OS problem or file corruption.
Recommended
Action
Reboot or power cycle the switch.
Severity WARNING
FABS-1009
Message <timestamp>, [FABS-1009], <sequence-number>,, WARNING, <system-name>, <Function
name>
: type is not media
Probable Cause Indicates that the Fabric OS was unable to locate an appropriate object handle. This is usually an
internal Fabric OS problem or file corruption.
Recommended
Action
Reboot or power cycle the switch.
Severity WARNING