Brocade Fabric OS Message Reference - Supporting Fabric OS v5.3.0 (53-1000437-01, June 2007)

Fabric OS Message Reference 125
53-1000437-01
FCR-1030
20
To avoid WWN conflicts, all EX_Ports attached to fabrics with highly dynamic changes to EX_Port
connectivity should be disabled then reenabled.
Severity INFO
FCR-1030
Message <timestamp>, [FCR-1030], <sequence-number>,, INFO, <system-name>, Physical device
<device WWN> came online at fabric <fabric ID>.
Probable Cause Indicates that the physical device world-wide name (WWN) came online in the specified fabric.
Recommended
Action
No action is required.
Severity INFO
FCR-1031
Message <timestamp>, [FCR-1031], <sequence-number>,, INFO, <system-name>, Physical device
<device WWN> went offline in fabric <fabric ID>.
Probable Cause Indicates that the physical device world-wide name (WWN) went offline in the specified fabric.
Recommended
Action
No action is required.
Severity INFO
FCR-1032
Message <timestamp>, [FCR-1032], <sequence-number>,, INFO, <system-name>, Edge fabric
enabled security on port <port number> in fabric <fabric ID>.
Probable Cause Indicates that Secure mode was turned on in the edge fabric.
Recommended
Action
No action is required.
Severity INFO
FCR-1033
Message <timestamp>, [FCR-1033], <sequence-number>,, INFO, <system-name>, Edge fabric
disabled security on port <port number> in fabric <fabric ID>.
Probable Cause Indicates that Secure mode was turned off in the edge fabric.