Brocade Fabric OS Message Reference - Supporting Fabric OS v5.3.0 (53-1000437-01, June 2007)

160 Fabric OS Message Reference
53-1000437-01
FW-1035
27
FW-1035
Message <timestamp>, [FW-1035], <sequence-number>,, WARNING, <system-name>, <Label>, is
above high boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause Indicates that the temperature of the small form-factor pluggable (SFP) has risen above the high
boundary. Frequent fluctuations in temperature might indicate a deteriorating SFP.
Recommended
Action
Replace the SFP.
Severity WARNING
FW-1036
Message <timestamp>, [FW-1036], <sequence-number>,, INFO, <system-name>, <Label>, is
between high and low boundaries(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause Indicates that the temperature of the small form-factor pluggable (SFP) has changed from a value
outside of the acceptable range to a value within the acceptable range. Frequent fluctuations in
temperature might indicate a deteriorating SFP.
Recommended
Action
No action is required.
Severity INFO
FW-1037
Message <timestamp>, [FW-1037], <sequence-number>,, INFO, <system-name>, <Label>, value
has changed(High=<High value>, Low=<Low value>). Current value is <Value> <Unit>.
Probable Cause Indicates that the receive power value of the small form-factor pluggable (SFP) has changed. The
receive performance area measures the amount of incoming laser to help you determine if the SFP
is in good working condition or not. If the counter often exceeds the threshold, the SFP is
deteriorating.
Recommended
Action
Incoming laser fluctuations usually indicate a deteriorating SFP. If this message occurs repeatedly,
replace the SFP.
Severity INFO