Brocade Fabric OS Message Reference - Supporting Fabric OS v5.3.0 (53-1000437-01, June 2007)

174 Fabric OS Message Reference
53-1000437-01
FW-1134
27
FW-1134
Message <timestamp>, [FW-1134], <sequence-number>,, INFO, <system-name>, <Label>, is
below low boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause Indicates that the number of fabric logins has fallen below the low boundary. Fabric logins occur
when a port or device initializes with the fabric. The event is called a fabric login or FLOGI. A low
number of fabric logins means that the fabric is functioning normally.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1135
Message <timestamp>, [FW-1135], <sequence-number>,, INFO, <system-name>, <Label>, is
above high boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause Indicates that the number of fabric logins has risen above the high boundary. Fabric logins occur
when a port or device initializes with the fabric. The event is called a fabric login or FLOGI.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1136
Message <timestamp>, [FW-1136], <sequence-number>,, INFO, <system-name>, <Label>, is
between high and low boundaries(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause Indicates that the number of fabric logins has changed from a value outside of the acceptable
range to a value within the acceptable range. Fabric logins occur when a port or device initializes
with the fabric. The event is called a fabric login or FLOGI.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO