Brocade Fabric OS Message Reference - Supporting Fabric OS v5.3.0 (53-1000437-01, June 2007)

Fabric OS Message Reference 181

53-1000437-01

FW-1174

Message <timestamp>, [FW-1174], <sequence-number>,, WARNING, <system-name>, <Port Name>,

<Label>, is above high boundary(High=<High value>, Low=<Low value>). Current value

is <Value> <Unit>.

Probable Cause Indicates that the number of protocol errors that the port experiences has risen above the high

boundary. Occasional protocol errors occur due to software glitches. Persistent protocol errors

occur due to hardware problems.

Recommended

Action

Check both ends of your connection. Verify that your cable and small form-factor pluggable (SFP)

are not faulty.

Severity WARNING

FW-1175

Message <timestamp>, [FW-1175], <sequence-number>,, INFO, <system-name>, <Port Name>,

<Label>, is between high and low boundaries(High=<High value>, Low=<Low value>).

Current value is <Value> <Unit>.

Probable Cause Indicates that the number of protocol errors that the port experiences has changed from a value

outside of the acceptable range to a value within the acceptable range. Occasional protocol errors

occur due to software glitches. Persistent protocol errors occur due to hardware problems.

Recommended

Action

No action is required. Respond to this message as is appropriate to the particular policy of the

end-user installation.

Severity INFO

FW-1176

Message <timestamp>, [FW-1176], <sequence-number>,, INFO, <system-name>, <Port Name>,

<Label>, value has changed(High=<High value>, Low=<Low value>). Current value is

<Value> <Unit>.

Probable Cause Indicates that the number of invalid words that the port experiences has changed. Invalid words

usually indicate a hardware problem with an small form-factor pluggable (SFP) or cable.

Recommended

Action

Check both ends of your connections, your SFP, and your cable to verify that none are faulty.

Severity INFO