Brocade Fabric OS Message Reference - Supporting Fabric OS v5.3.0 (53-1000437-01, June 2007)

Fabric OS Message Reference 187
53-1000437-01
FW-1192
27
FW-1192
Message <timestamp>, [FW-1192], <sequence-number>,, INFO, <system-name>, <Port Name>,
<Label>, value has changed(High=<High value>, Low=<Low value>). Current value is
<Value> <Unit>.
Probable Cause Indicates that the number of state changes that the port experiences has changed. The state of the
port has changed for one of the following reasons: the port has gone offline, has come online, is
testing, is faulty, has become an E_Port, has become an F_Port, has segmented, or has become a
trunk port.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1193
Message <timestamp>, [FW-1193], <sequence-number>,, INFO, <system-name>, <Port Name>,
<Label>, is below low boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause Indicates that the number of state changes that the port experiences has fallen below the low
boundary. The state of the port has changed for one of the following reasons: the port has gone
offline, has come online, is testing, is faulty, has become an E_Port, has become an F_Port, has
segmented, or has become a trunk port.
A low number of port state changes means that the switch is functioning normally.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1194
Message <timestamp>, [FW-1194], <sequence-number>,, WARNING, <system-name>, <Port Name>,
<Label>, is above high boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause Indicates that the number of state changes that the port experiences has risen above the high
boundary. The state of the port has changed for one of the following reasons: the port has gone
offline, has come online, is testing, is faulty, has become an E_Port, has become an F_Port, has
segmented, or has become a trunk port.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity WARNING