Brocade Fabric OS Message Reference - Supporting Fabric OS v5.3.0 (53-1000437-01, June 2007)

Fabric OS Message Reference 231
53-1000437-01
FW-1437
27
FW-1437
Message <timestamp>, [FW-1437], <sequence-number>,, WARNING, <system-name>, Switch status
change contributing factor faulty ports: <Num of faulty ports>. (Port(s)
<unknown>.
Probable Cause Indicates that the switch status is not in a healthy state. This occurred because the number of
faulty ports is greater than or equal to the policy set by the switchStatusPolicySet command. A port
is considered faulty due to hardware failure such as a faulty small form-factor pluggable (SFP) or
port.
Recommended
Action
Replace any faulty or deteriorating small form-factor pluggables (SFPs).
Severity WARNING
FW-1438
Message <timestamp>, [FW-1438], <sequence-number>,, WARNING, <system-name>, Switch status
change contributing factor Missing SFPs:
<Num of missing SFPs> missing SFPs.
Probable Cause Indicates that the switch status is not in a healthy state. This occurred because the number of
missing small form-factor pluggables (SFPs) is greater than or equal to the policy set by the
switchStatusPolicySet command.
Recommended
Action
Run the switchStatusPolicySet command to modify the SFP policy or to add SFPs to the empty
ports.
Severity WARNING
FW-1439
Message <timestamp>, [FW-1439], <sequence-number>,, WARNING, <system-name>, Switch status
change contributing factor Switch offline.
Probable Cause Indicates that the switch status is not in a healthy state. This occurred because the switch is
offline.
Recommended
Action
Run the switchEnable command.
Severity WARNING