Brocade Fabric OS Message Reference - Supporting Fabric OS v5.3.0 (53-1000437-01, June 2007)

266 Fabric OS Message Reference
53-1000437-01
ICPD-1004
36
ICPD-1004
Message <timestamp>, [ICPD-1004], <sequence-number>,, WARNING, <system-name>, iSNS Client
service is detected on multiple switches in fabric.
Probable Cause Indicates that iSNS Client service is enabled on multiple switches in fabric.
Recommended
Action
Enable the iSNS Client service on a single switch in the fabric using the fosConfig command. Refer
to the Fabric OS Command Reference for more information on this command.
Severity WARNING
ICPD-1005
Message <timestamp>, [ICPD-1005], <sequence-number>,, WARNING, <system-name>, iSCSI
configuration between local switch (<local domain id>) and peer (<peer domain id>)
is out of sync. iSCSI login is not allowed.
Probable Cause Indicates that iSCSI switches in the fabric have different configurations in AUTH, VT, or DD.
Recommended
Action
Sync up the configuration in the fabric using the iscsiCfg command. Refer to the Fabric OS
Command Reference for more information on this command.
Severity WARNING
ICPD-1006
Message <timestamp>, [ICPD-1006], <sequence-number>,, INFO, <system-name>, iSCSI service
is
<status> on the switch.
Probable Cause Indicates that the iSCSI service is enabled or disabled on the switch.
Recommended
Action
No action is required.
Severity INFO
ICPD-1007
Message <timestamp>, [ICPD-1007], <sequence-number>,, INFO, <system-name>, iSNSC service
is
<status> on the switch.
Probable Cause Indicates that the iSNSC service is enabled or disabled on the switch.
Recommended
Action
No action is required.
Severity INFO