Brocade Fabric OS Message Reference - Supporting Fabric OS v5.3.0 (53-1000437-01, June 2007)

288 Fabric OS Message Reference

53-1000437-01

MFIC-1003

Message <timestamp>, [MFIC-1003], <sequence-number>,, WARNING, <system-name>, Effective

Insistent domain ID for the fabric changed from <state> to <state>

Probable Cause Indicates that one or more switches joined the fabric with a different insistent domain ID (IDID)

mode setting than the current effective IDID mode for the fabric. This message also occurs when

the IDID for the fabric has been turned on or off. The possible values for state are "On" or "Off".

Recommended

Action

IDID mode is a fabric-wide mode; make sure that any switches added to the fabric are configured

with the same IDID mode as the fabric. If you are enabling or disabling IDID mode, this message is

for information purposes only, and no action is required.

IDID mode can be set using the configure command in the CLI or checking the Advanced Web Tools

Switch Admin > Configure Tab > Fabric Subtab > Insistent Domain ID Mode checkbox. The switch

must be disabled to change the IDID mode.

Severity WARNING