Brocade Fabric OS Message Reference - Supporting Fabric OS v5.3.0 (53-1000437-01, June 2007)

318 Fabric OS Message Reference
53-1000437-01
PS-1003
55
PS-1003
Message <timestamp>, [PS-1003], <sequence-number>,, WARNING, <system-name>, Failed to set
end-to-end monitoring mask on ISL ports.
Probable Cause Indicates that the restoring configuration has attempted to set the end-to-end monitoring mask on
at least one ISL port.
Recommended
Action
No action is required. End-to-end monitoring is not supported on ISL ports when ISL monitoring is
enabled. ISL monitoring can only be disabled through the Fabric Access API.
Severity WARNING
PS-1004
Message <timestamp>, [PS-1004], <sequence-number>,, WARNING, <system-name>, Failed to add
end-to-end monitors on port
<port> which is an ISL port.
Probable Cause Indicates that the restoring configuration has attempted to add end-to-end monitors on at least
one ISL port.
Recommended
Action
No action is required. End-to-end monitoring is not supported on ISL ports when ISL monitoring is
enabled. ISL monitoring can only be disabled through the Fabric Access API.
Severity WARNING
PS-1005
Message <timestamp>, [PS-1005], <sequence-number>,, WARNING, <system-name>, ISL monitor
on port
<port> stopped counting because no hardware resources are available
Probable Cause Indicates that ISL and end-to-end monitors have used up all hardware resources.
Recommended
Action
To resume counting, delete some end-to-end monitors sharing the same hardware resource pool.
Severity WARNING