Brocade Fabric OS Message Reference - Supporting Fabric OS v5.3.0 (53-1000437-01, June 2007)

Fabric OS Message Reference 319
53-1000437-01
Chapter
56
PSWP System Messages
PSWP-1001
Message <timestamp>, [PSWP-1001], <sequence-number>,, INFO, <system-name>, Areas for port
<wwn name corresponding to source port> and port <wwn name corresponding to
destination port> are swapped. New area for port <wwn name corresponding to source
port> is <wwn name corresponding to destination port> and port <new area
corresponding to source wwn> is <new area corresponding to destination wwn>.
Probable Cause Indicates that the portSwap command has been issued.
Recommended
Action
No action is required.
Severity INFO
PSWP-1002
Message <timestamp>, [PSWP-1002], <sequence-number>,, INFO, <system-name>, Port Swap
feature enabled.
Probable Cause Indicates that the portSwap feature has been enabled in the switch.
Recommended
Action
No action is required.
Severity INFO
PSWP-1003
Message <timestamp>, [PSWP-1003], <sequence-number>,, INFO, <system-name>, Port Swap
feature disabled.
Probable Cause Indicates that the portSwap feature has been disabled in the switch.
Recommended
Action
No action is required.
Severity INFO